February 08, 2012, 04:07:36 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 

Pages: [1]
  Send this topic  |  Print  
Author Topic: FS: 15" Bogart Welded RT's, and 18" Chrome Bullitts  (Read 705 times)
South Jersey Stang
Newbie
*
Posts: 3



Ignore
« on: September 15, 2007, 12:29:19 PM »

1)
FS: Bogart Welded RT's for big brakes, 15x10/15x4 w 165/15 and MT radial 275/50


These are all practically new. They have 2 dyno pulls and 5 miles of street driving on them.
Car sat outside for a couple weeks so I would repolish them, but beyond that, they are in almost perfect condition.

Includes: All 5x4.5 bolt pattern

2 Front-
15x4 Bogart Welded RT
Nankang 165/15 tires
BS is 3/4"

These use a welded on spacer to clear 13" brakes.
 

2 Rear-
15x10 Bogart Welded RT
Mickey Thompson Drag Radials 275/50/15
BS is 6.5

These are also made to clear big brakes.
With my 12" rear Baer brakes, I had to do very minor clearancing on the caliper and the emergency brake cable bracket.
If your rear brakes are smaller you may need less or possibly no clearancing.


Issues:
First of all, the weights had to be put on the outside of the rim, which some people hate. But my calipers were so close I had to use them there.
The caliper and the emergency brake cable let me know they needed clearancing on the first couple seconds of the dyno pull. They made a couple marks on the inside of the rim, that you can't see unless the rim is off and has no bearing on the structure or integrity of the wheel. I am just anal retentive and had to mention it.


These were all purchased brand new!!!
Were on the car for basically no miles. It sat around with them on it longer than it moved under its own power.

Rims were $1700 (which was a deal in itself).
Tires were $200 for fronts, and $335 for rears.
Total: $ 2235


This includes center caps, and lugs.
The only thing is I would replace the washers b/c if you know these things they start to rust the first time you wash the rims, and then they eventually get rust spots on the rims, which these have not done yet. So I would replace the washers to keep that from occurring when installing them.


$1750 picked up!!!
or
$1875 shipped!!!


Located in Southern NJ. Will ship at buyers expense.

stand66@hotmail.com

PICS:













On car:






2)
FS: Almost NEW 18x9/18x10 Chrome Bullitts with 235/265 Pirelli tires

I have a set of Chrome Bullitts I am selling. I believe they are AFS rims.
These rims and tires have less than 2000-3000 miles on them total....

Front:
18x9 with Pirelli P-Zero Nero 235/40/18 tires

Rear:
18x10 DD with Pirelli P-Zero Nero 265/40/18 tires


The tires are a little smaller than I would like on the rims, but they look great. I usually like to use a larger tire as it covers the edge of the rim better and saves it from any damage should you rub anything by accident.
Rest assured though, these have never touched a curb and were polished and waxed every few weeks.

The rims are just about perfect.
I found about 3 nicks in them that are less than a centimeter in size, that you would never notice unless I pointed them out. They are not through the chrome finish, just small dots in the chrome.
No curb rash at all.

I am only selling these as I just got a new set of CCW's for the car.

Price:
$1100 shipped in the US

NO TRADES!!

stand66@hotmail.com

Located in Southern NJ


PICS:









On car:








Thanks
Stan
Logged
Pages: [1]
  Send this topic  |  Print  
 
Jump to:  

Powered by SMF 1.1.5 | SMF © 2006-2008, Simple Machines LLC