Deep Dish 03 Cobra Wheel size poll...Please vote...

[427windsorman]

I am new here, but do post on svtperformance, the Corral,and a few other boards. I wanted to get some feedback from members here on the possible production of deep dish 03 Cobra wheels made to fit the IRS without spacers.

I contacted a local wheel manufacturer about producing these, and they contacted me back about the deep dish 03 Cobra wheels. He wanted to get a feel for what sizes everyone wants. They are only going to make 2 sizes to start with, and that is what the poll is for. This is what they asked me:

Hi,
Could you post something out there that would check and see what combination people would like:
17x8.5 / 17x10.5
17x9 / 17x10.5
17x9 / 17x11
18x9 / 18x10
18x9 / 18x11
I would probably only do 2 sizes to start.

I want the 17"x9" / 17"x11" and 18"x9" / 18" x 11" wheels produced. Please vote so we can get a majority vote

[427windsorman]

So, no one with an IRS Cobra or Mustang is interested in voting for the sizes to be manufactured for DD 03 Cobra wheels?

This is your chance to have your opinions count

[Iwannacobra]

Any word on this as of yet? Aloha.

[427windsorman]

Any word on this as of yet? Aloha.

They are in the design and engineering review stage. They are going to be produced, that has been decided. Now they are trying to get the design down so they fit with no spacer, and without having to shave the IRS bolt.

[427windsorman]

For those that are not aware, the DD 03 Cobra Wheels are in production. There is an un-revised version currently available, and a revised version that will be available shortly.

The company producing them is Wheel Replica's in Katy, TX. You can see the pictures of the pre-revision version under the specials section of their website. There are only 25 sets available, and only 17 of those are IRS specific.

The revision being done is to the spokes.