December 03, 2008, 10:56:51 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
Del.icio.us Digg FURL Stumble Upon Reddit Google Bookmarks MSN Live Yahoo My Web

Pages: [1]
« previous next »
  Send this topic  |  Print  
Author Topic: looking for 351 block need help with cast #  (Read 1058 times)
lowhurtz
Newbie
*
Posts: 10



Ignore
« on: August 01, 2006, 08:37:52 PM »
block # is DIAE 6015 DA 12 does this mean anything to anyone ?
Logged
MurPHy
NJ redneck
Badass Member
*****
Posts: 1253




Ignore
« Reply #1 on: August 05, 2006, 03:26:50 PM »
Quote from: lowhurtz on August 01, 2006, 08:37:52 PM
block # is DIAE 6015 DA 12 does this mean anything to anyone ?


D1AE-6015-DA

D = 1970's
1 = 1971
A = Galaxie
E = Engine

6015 = Basic part number

DA = Revision number. Ford starts with A, then goes to AA after it runs out of alphabet.

I dunno about the 12.
Logged
lowhurtz
Newbie
*
Posts: 10



Ignore
« Reply #2 on: August 06, 2006, 07:18:42 AM »
would this be 351w or something elese ?
Logged
MurPHy
NJ redneck
Badass Member
*****
Posts: 1253




Ignore
« Reply #3 on: August 06, 2006, 08:54:36 AM »
Quote from: lowhurtz on August 06, 2006, 07:18:42 AM
would this be 351w or something elese ?


Post a photo of it.
Logged
lowhurtz
Newbie
*
Posts: 10



Ignore
« Reply #4 on: August 08, 2006, 03:47:51 AM »
what should i be looking for no camara
Logged
MurPHy
NJ redneck
Badass Member
*****
Posts: 1253




Ignore
« Reply #5 on: August 10, 2006, 10:42:29 AM »
Quote from: lowhurtz on August 08, 2006, 03:47:51 AM
what should i be looking for no camara

A '71 Galaxie could be a few different engines.

240, 302, 351, 390, 400, and 429.

The 351 could either be a 351W or a 351C, the 400 is a tall-deck 351C, so it looks very similar. The 390 and 429 are bigblocks, easy to distinguish.

Count the bolts on the valvecovers. If it's 6, it's a 302 or 351W. If it's 7, its a 390. If it's 8, its a 351C or 400.
Logged
lowhurtz
Newbie
*
Posts: 10



Ignore
« Reply #6 on: August 14, 2006, 12:32:31 PM »
it has 6 but how will i know 302 vs 351 ?
Logged
MurPHy
NJ redneck
Badass Member
*****
Posts: 1253




Ignore
« Reply #7 on: August 16, 2006, 08:36:52 PM »
Quote from: lowhurtz on August 14, 2006, 12:32:31 PM
it has 6 but how will i know 302 vs 351 ?


The block is taller on the 351. If you look at the timing cover, where the water inlet passages are, there should be a good inch between that and teh deck. On a 302, it is flush.
Logged
Dave88LX
It's all Nuts and Bolts
Badass Member
*****
Posts: 9428
Vehicle: 1997 Pontiac Firebird


Crush the Chargers.




Ignore
« Reply #8 on: August 24, 2006, 05:53:58 AM »
Measure the diameter of the mains.  3" = 351W.

Measure across the lifter valley, 9.5" = 351W.
Logged
Pages: [1]
  Send this topic  |  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.5 | SMF © 2006-2008, Simple Machines LLC