Anderson B-21 camshaft specs

[Freakingstang]

Just thought I'd share some cam specs with you guys

[Evil95GT]

Steve,
Thanks so much for posting this. That cam may be just the ticket for the '95. I was thinking about using a Steeda #19 after having good luck with it in the '89. I always wanted to buy an Anderson cam, but they're anal and won't tell you the specs until it's at your door. 

[Freakingstang]

Here is something else...The B-31 is the same cam, but meant for 1.6 rockers (same lift as B-21 with 1.7's).  I gotta say I love it.  I got it used from John, and it is a blower cam, but this thing is pure awesome N/A.  I've ran that Wolverine 1087, E303, B303, and a few others and this blows them out of the water.

[Freakingstang]

Oh, check the classifieds, as you can usually pick them up for 100-150.  I remember seeing one on the corral for $150 with like 1500 miles, also there have been a few on stangnet in the past.

[Aussie XAXB]

Blower cams typically have minimal overlap so that you are not blowing gasoline out the exhaust.

Steve

[Freakingstang]

Blower cams typically have minimal overlap so that you are not blowing gasoline out the exhaust.

Steve

Or Boost.  I planned on a blower setup in the near future, that is why I originally put the cam in.  Now I'm curious what it will do under under 10-12lbs of boost.